An experienced technician at a plastic products factory in Cornwall was killed after he was crushed between the plates on a machine used to make plastic lids.

The Health and Safety Executive prosecuted Curver UK Ltd (formerly Contico Europe Ltd) for failing to provide adequate safety measures.

Truro Crown Court heard that in preparing the machinery Mr O'Dwyer needed to access the plastic mouldings machine's plates. This was normally done via a guard which, when opened, prevented the machine from operating. However in this case one of the conveyors on the machine had been removed and Mr O'Dwyer was able to access the machine through an unguarded gap. Whilst he was inside the press started to operate and the plates closed crushing him at a pressure of over 1,000 tonnes.

Curver UK Ltd pleaded guilty to committing a breach of Regulation 11 (1) of the Provision and Use of Work Equipment Regulations under Section 33(1) (c) of the Health and Safety at Work Act 1974 and was fined £160,000 and ordered to pay £32,000 costs.